Furniture Dimensions That Fit Real Rooms

A sofa can fit against a wall and still leave no comfortable way around it. Use these typical dimensions as a starting point, then measure the exact piece, the route into the room, and the space needed to use it.

All measurements below are approximate. Furniture sizes vary by maker, and bed names vary by region. Width is the space across the front of a piece, depth is how far it projects into the room, and height is measured from the floor.

Seating

Seating often determines the rest of a living room layout. Check the full depth of a sofa as carefully as its width.

Sofas and chairs

PieceTypical widthTypical depthTypical height
Two seat sofa150 to 180 cm85 to 100 cm75 to 90 cm
Three seat sofa190 to 240 cm85 to 100 cm75 to 90 cm
Armchair80 to 95 cm80 to 95 cm75 to 100 cm
Dining chair40 to 55 cm40 to 55 cm75 to 100 cm

A corner sofa needs both legs measured separately. Leave roughly 36 to 46 cm between a sofa and a coffee table so the table remains reachable without crowding knees.

Tables

The table footprint tells only part of the story. Dining chairs need space to move, and a coffee table needs a comfortable gap from the seating.

Coffee and side tables

PieceTypical sizeTypical height
Rectangular coffee table100 to 140 cm long and 50 to 70 cm deep40 to 50 cm
Round coffee table60 to 100 cm diameter40 to 50 cm
Side table40 to 60 cm wide and deep55 to 70 cm

A side table near the sofa arm is easier to use when its top is close to the arm height. Check whether the table shape leaves a clear route around the seating.

Dining and work tables

PieceTypical length or diameterTypical depthTypical height
Dining table for four120 to 150 cm80 to 90 cmAbout 75 cm
Dining table for six150 to 180 cmAbout 90 cmAbout 75 cm
Round dining table for four100 to 120 cm diameterSame as diameterAbout 75 cm
Home desk120 to 160 cm60 to 80 cmAbout 72 to 76 cm

Allow about 60 cm of table edge per diner. Leave around 90 to 110 cm from the dining table edge to a wall if chairs need to pull out and someone must pass behind them.

Beds and bedroom storage

Measure the whole bed frame rather than relying on the mattress name. Frames and headboards can extend beyond the mattress.

Bed footprints

Mattress sizeTypical mattress widthTypical mattress lengthPlanning note
SingleAbout 90 cmAbout 190 to 200 cmCheck the local size standard
DoubleAbout 135 to 140 cmAbout 190 to 200 cmFrame adds to the footprint
QueenAbout 152 to 160 cmAbout 200 to 203 cmName varies by region
KingAbout 180 to 193 cmAbout 200 to 203 cmName varies by region

Leave around 60 to 75 cm on a side used to get into bed. If a wardrobe faces the bed, include the room needed to open its doors.

Bedroom storage

PieceTypical widthTypical depthTypical height
Nightstand40 to 70 cm35 to 50 cmAbout 55 to 75 cm
Dresser80 to 160 cm40 to 55 cmAbout 75 to 110 cm
Wardrobe80 to 150 cm50 to 65 cmAbout 180 to 210 cm

A dresser needs more than its closed depth. Leave space for the drawer to extend and a person to stand in front of it.

Clearances that make the room usable

WhereStarting allowanceWhy it matters
Main route through a roomAbout 90 cmPeople can pass without turning sideways
Secondary route between furnitureAbout 60 to 75 cmAllows occasional movement
Sofa to coffee tableAbout 36 to 46 cmKeeps the table reachable
Dining table edge to wallAbout 90 to 110 cmAllows chairs to move and people to pass
In front of drawersAbout 90 cmAllows the drawer to open and be used

These figures are planning guides, not guarantees of fit. Mark the furniture footprint and its clearance on a measured room plan, then check doorways, turns, windows, and the exact product before buying.

← Back to the homepage